How to Use a Bench Grinder

Author Info

Last Updated: March 22, 2021

A bench grinder can be used to grind, cut or shape metal. You can use the machine to grind down sharp edges or smooth burrs off metal. You can also use a bench grinder to sharpen metal pieces -- for example, lawnmower blades.

Method 1

Method 1 of 2:

Turning on the Grinder

Download Article

1
Perform a safety check before turning the grinder on.
- Make sure the grinder is tightly secured to the bench.
- Check that the tool rest is in place on the grinder. The tool rest is where the metal item will rest as you grind it. The rest should be secured in place so there is a 1/8 inch (3 mm) space between it and the grinding wheel.
- Clear the area around the grinder of objects and debris. There should be enough space to easily push the piece of metal you are working with back and forth on the grinder.
- Fill a pot or bucket with water and place it near the metal grinder so you can cool off any metal that gets too hot while you grind it.
Wear safety glasses, steeled toed shoes (or at least no open-toe shoes), ear plugs or muffs and a face mask to protect yourself from grinding dust.^{[1]
X
Research source}

Advertisement
Stand to the side until the grinder reaches maximum speed.
Move so you are directly in front of the grinder. Holding the metal tightly in both hands, place it on the tool rest and slowly push it towards the grinder until it touches the edge only. Do not allow the metal to touch the sides of the grinder at any time.
To cool the metal off after or during grinding, dip it into a bucket or pot of water. Keep your face away from the pot to avoid the steam created by the hot metal hitting the cooler water.

Method 2

Method 2 of 2:

Grinding, Cutting, Shaping and Sharpening

Download Article

Move the metal back and forth across the grinder until the chunk of metal is gone. Holding the metal against the grinder in one place for too long will warm it up, and could damage the piece.
2
Cut through a metal piece.
- Hold the metal on the tool rest and turn it gently until the grinder comes in contact with the spot you want the cut.
- Keep turning the piece until it breaks in half. Make sure you hold each end. Dip both hot ends in water when you are done.
3
Shape a metal piece.
- Touch a piece of metal to the grinder at the spot where you want it to bend. Use a back and forth motion, as you would to grind a part off.
- When you see the metal turning orange, it is warm enough to be pulled away from the grinder. Use both hands to bend the metal to the shape you want. Dip it in water once it is the right shape.
4
Sharpen a metal blade.
- Rest the piece on the tool rest and hold it securely with both hands.
- Slowly push the blade into the grinder, angling it slightly up or down so the grinder cuts metal away to create a pointed, sharp edge. Use the same forward-and-back motion, rubbing the blade across the bench grinder to prevent cutting into the blade or warming it up too much.

Community Q&A

Search

Add New Question

Question

What is the purpose of the grinding machine?

Community Answer

Tool sharpening mostly (chisels, engraving tools, hoes, edgers). You can look up instructions on YouTube!

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 6
Question

Should the stone spin towards the blade or away from it?

Community Answer

The stone should spin away from the blade to create a thinner blade at the extremity with a 10 degree angle.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 9 Helpful 3
Question

What is the rest tool on a bench grinder used for?

Community Answer

The tool rest provides you with a solid base on which to rest the piece of metal or tool you are grinding. Without this, the object would be impossible to hold steady and would probably be flung across the room.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 4

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Make sure you have the right grinding wheel for the metal or cut you are working with. Much like sandpaper, grinding wheels are made to accomplish different types of precision grinds. Some wheels are designed to cut through metal, while others are for making small, gentle surface rubs.

Thanks
Helpful 1 Not Helpful 0
Do not wear gloves when operating a bench grinder. Even glancing contact with hands will quickly and certainly remove skin, a glove becoming caught in the wheel can easily remove whole fingers. Light latex gloves are OK to save your hands from irritant dust etc.

Thanks
Helpful 1 Not Helpful 1